Technician repairing a Schick sensor at Sodium Dental, a dental sensor repair company in Ann ArborSure, we’re going to tell you we’re the best dental sensor repair company. Every repair facility’s website says that about itself. So don’t take our word for it.

Your sensor just quit, somebody quoted you $8,000 to $10,000 for a new one, and now you’re trying to figure out which repair facility to trust with it. That’s the right instinct. A repair done wrong can ruin a sensor that could have been saved.

Below are the six questions we’d ask any sensor repair facility before shipping them a sensor. Ask them of us, too. Our answers are right under each one.

Six Questions to Ask Any Dental Sensor Repair Company

Get the answers in an email, not just over the phone. People will say anything on a call.

1. Who actually does the repair?

Some companies advertising sensor repair take your sensor in and ship it off to someone else. Ask if their own employees do the work, and where.

Our answer: Every repair is done in house, on our own bench in Ann Arbor, by our own techs.

2. Do you replace the whole cable, or splice it?

A splice puts a brand new weak spot in the middle of a cable that bends all day.

Our answer: We replace the whole cable, every time. Our cable runs a slightly thicker gauge wire than the original. More on cable replacement.

3. What does the evaluation cost, and what if you can’t fix it?

Some repair facilities charge a diagnostic fee just to tell you it’s dead.

Our answer: The evaluation is free. We’ve never charged a practice a diagnostic fee. If we can’t fix it, you don’t pay for a repair, and you only pay return shipping if you want it back.

4. Will I see a price before you touch it?

You should never find out the cost after the work is done.

Our answer: You’ll have an estimate within 48 hours of your sensor arriving, with our tech’s notes on what failed. Nothing gets touched until you approve it.

5. How is it tested before it ships back?

A sensor that powers on isn’t the same as a sensor that takes good x-rays.

Our answer: Every repaired sensor goes through our final testing, including a full-mouth series on our bench. Dexis and Gendex sensors are tested in DEXIS imaging software.

6. What’s the warranty?

Find out how long, and what it covers.

Our answer: Every repair carries a 30-day warranty, with a 1-year option. Repaired Dexis Platinum, Dexis Titanium and Gendex GXS-700 sensors get 30 days of our Protection Plan instead, which covers drops and accidents with no deductible.

Have a Dexis? We go deeper on the Dexis-specific questions in choosing a Dexis repair facility.

Watch Out for Repair Facilities Using Our Name

Dentists have told us they shipped a sensor to a repair facility that claimed to be Sodium Dental, or claimed to work with us, and the sensor came back destroyed or never came back at all. We can’t tell you who every one of them is. We can tell you how to make sure you’re dealing with us:

Repairs ship to:

Sodium Dental
ATTN: SENSOR REPAIR
540 Avis Dr, Suite H
Ann Arbor, MI 48108

If anything about a “Sodium” shipping label or invoice doesn’t match that, call us before you ship.

What a Dental Sensor Repair Costs

Our sensor repairs cost a fraction of what it takes to replace a sensor that can run $8,000 or more. The exact price depends on the sensor and what failed.

  • Can’t be down a sensor while it’s out? Our loaner sensor is $500 for 30 days.
  • In a hurry? Express repair sends you a FedEx overnight label, puts your sensor at the front of the line, and overnights it back.
  • Not worth fixing? We’ll tell you. Our pre-owned sensors cross the same bench as our repairs, and pre-owned Dexis and Gendex sensors start at $3,395 with a Protection Plan included.

The rest of what dentists ask us, shipping, payment, what happens to a sensor we can’t fix, is in our dental sensor repair FAQ.

Why Dentists Send Their Sensors to Us

We started repairing sensors in 2011, and we were the first company to ever offer sensor repair to dentists. We’ve repaired more than 12,000 sensors since then: Dexis, Gendex, Schick, Kodak and every other brand that crosses our bench.

We also repair intraoral cameras, intraoral scanners and handheld tubeheads, Nomads included.

That’s our side of it. Here’s what dentists say about our sensor repair.

Sensor Acting Up?

If your sensor is taking an image before you expose it, giving you blank images, dropping its connection, or only working with the cable held just right, send it to us. The evaluation is free, and you’ll have an estimate within 48 hours!

You can also talk to us on our online chat or email sales@sodiumdental.com.